18
Customized setting (continued)
DISPLAY
You can display the programme number, video terminal number
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
Choose a TV channel or a VIDEO terminal.
1
Press the DISPLAY button to display the PR LIST.
2
Select a programme number or video terminal by pressing the
5
/
∞
button to move up/down on the programme number or press
the
2
/
3
button to skip for each 7 programme numbers, then press
MENU/OK button.
ON OFF PR LIST
PR
CH/CC
V1
V2
V3
AV
1
2
3
CH 09
CC 76
CC 78
PR LIST
MENU : OK
-7
+7
■
■
■
VIDEO-2 SETTING
You can set the VIDEO-2 SETTING according to the video signal
output from external devices connected to the VIDEO-2 terminal.
Select VIDEO-2 SETTING in INSTALL menu, then choose a setting
(Factory setting is COMPONENT).
MENU
INSTALL menu
VIDEO-2 SETTING
VIDEO
If a normal video signal (composite video signal) is input.
COMPONENT
If a component video signal (Y/C
B
/C
R
) is input.
You must choose a setting according to the signal that you input to
VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2,
you must set VIDEO-2 SETTING to VIDEO.)
For connecting methods, see “Additional Preparation” on page 22.
About the basic operations of the menu, please see the “How to
operate menus and menus locations” on page 5.
BEEP
You can use the BEEP function to alert you during DVD AUTO
SIGNAL DETECT, AI ECO SENSOR Detect, Stereo Detect, ON
TIMER/OFF TIMER operations and when some buttons on the
remote control are pressed.
Select BEEP in the INSTALL menu, then choose ON or OFF.
When the volume is level 0, then BEEP function is not available.
MENU
INSTALL menu
BEEP
GGT0116-001A-H.indd 18
GGT0116-001A-H.indd 18
26.04.2006 17:07:56 Uhr
26.04.2006 17:07:56 Uhr
