5
PICTURE/OK
SKIPPING THE CHANNELS
Position the cursor to the programme number you wish to skip, then press the
RED
(SKIP) (A4) button. A skipped programme is marked with the sign "
"
at its right end. The channel corresponding to a skipped programme will not
appear on screen when changing channels using
PROGRAM UP
(A11) /
DOWN
(A12) buttons.
ACTIVATING MANUAL TUNING
Move the cursor to
FREQUENCY
(channel frequency) menu and press and hold for more than 2 seconds the remote
control
CURSOR LEFT
(A13) or
RIGHT
(A14) buttons. When one channel is tuned, the corresponding station name is
indicated automatically in
NAME
menu.
To tune the next channel, press the remote control
CURSOR LEFT
(A13) or
RIGHT
(A14) buttons again.
Tuning by
ATSS
(Auto Tuning Sorting System) is recommendable, as it is the
easiest tuning method. But Manual Tuning is also possible using the following
procedure.
BROADCASTING SYSTEM SELECTION
Select
INSTALL m
enu and using the remote control
CURSOR UP
(A11) /
DOWN
(A12) buttons, move the cursor to
SYSTEM
menu and select the appropriate system
by the
LEFT
(A13) or
RIGHT
(A14) button.
"FRANCE"
France SECAM L/L'
"GB"
Great Britain / Ireland PAL-I/I'
"EURO"
Westen Europe PAL-SECAM B/G
"E/EURO"
Eastern Europe PAL-SECAM D/K
CHANNEL AND FREQUENCY MENU
If you know the channel or frenquency number you want to search, enter the data by 0...9 buttons.
TV will tune that channel quickly.
STORING CHANNEL NAME
When one channel is tuned, the corresponding station NAME will be detected automatically. But in some cases, NAME
will not be detected due to the broadcasting situation. You may put in the channel NAME yourself.
Position the cursor to
NAME
menu and press the remote control
CURSOR RIGHT
(A14) button. A cursor appears on the
left end of NAME line ("-----"). Then press
CURSOR UP
(A11) or
DOWN
(A12) buttons untill you get the right letter or
symbol. Move the cursor to the next position by using
CURSOR LEFT
(A13) or
RIGHT
(A14) buttons and repeat the
operation. Press
OK
(A9) button to store the NAME.
PROGRAM MENU
The number on the right side of the
PROGRAM
menu indicates the program number of the currently displayed channel.
MANUAL CHANNEL TUNING
STORE TO MENU
Select
STORE TO
menu and select the program number by 0....9 buttons or
CURSOR LEFT
(A13) or
RIGHT
(A14) buttons
to which you want to store the currently displayed channel then press
OK
button.
Warning
! If you store the number already programmed, the previous programmes will be erased automatically.
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
GB
GB
C 49
551.25
BBC1
01
01
ENGLISH
PERFORM FINE TUNING
If you are unable to obtain good picture or reasonable sound volume due to poor reception it is possible to perform fine tuning.
- Select the "
FREQUENCY
" menu.
- Press for less than 2 seconds, the remote control
CURSOR LEFT
(A13) and
CURSOR RIGHT
(A14) buttons to activate
FINE TUNING
in steps of 0.05 MHz(50kHz).
_ / +
