CONNECTING EXTERNAL EQUIPMENT
Rear
AERIAL socket
The rear Scart EXT-1, Scart EXT-2 sockets, the front EXT -3 socket are three dedicated sockets to connect audio-video equipment.
REAR SCART SOCKET (EXT-1)
This socket has video / audio inputs and outputs. It is recommended
to connect to this socket automatic AV switching equipment such
as pay-TV decoders, video games, DVD players and most VCR's.
In most cases, when connecting powered equipment to this socket,
the TV set switches automatically to AV mode. If not, then use the
AV
buttons (A15 or B8) to select
EXT-1
.
VCR / DVD / Video Game / Pay-TV decoder
Important
: If your video equipment does not have SCART socket(s), or if you wish to
use only the aerial (RF) connection (not recommended), then you should make use
of program number 00 on the TV set for best performance.
REAR SCART SOCKET (EXT-2)
This socket has video / audio inputs and outputs.
Automatic AV switching equipment (for example most
VCR's) can be connected to this socket. In most cases,
when connecting powered equipment to this socket, the
TV set switches automatically to AV mode. If not, then
use the
AV
buttons (A15 or B8) to select
EXT-2
.
You can also receive an
S-VHS
signal by selecting
EXT-2 S
with the
AV
buttons (A15 or B8).
Front
HEADPHONE SOCKET
To hear TV sound with headphones,
insert a 3.5mm headphone plug into the
headphone socket. The speaker's sound
will be automatically cut off.
FRONT S-VHS JACK
The front S-VHS jack
(B2) has video inputs
only. It is necessary to
connect the audio inputs
to socket (B4) in order to
have audio and video.
To watch TV from these
inputs, use the AV
buttons (A15 or B8) and
select
EXT-3 S
.
OR
12
ENGLISH
EXT-1
ANT
EXT- 2
( S
)
FRONT AV SOCKET (EXT-3)
The front AV socket has audio and video inputs. Without the video input connection, audio output is not available
.
To switch from TV to these inputs, use the AV buttons (A15 or B8) and select
EXT-3
.
Note
(
ONLY FOR AV-29FT1 MODEL): Do not connect the cables to front video input and S-video input at the same time. If do so, picture will
not be displayed properly.
TV/AV SELECTION
Allows to switch between TV and external modes. By repeatedly pressing the remote control
AV
(A15) or the
TV front panel
TV /AV
button (B8), the on-screen display is changed as shown :
EXT-1 > EXT-2 > EXT-2 S > EXT-3 > EXT-3 S > TV (AV-29FT1 model)
EXT-1 > EXT-2 > EXT-2 S > EXT-3 > TV (AV-21FT1 model)
Remark
: If the signal source from the rear SCART socket (EXT-1) is RGB (e.g.normally from a DVD player)
then EXT-1 RGB will be displayed. You can return to TV mode also by pressing number buttons or PROGRAM
UP/DOWN buttons
AV
AV-21FT1 MODEL
AV-29FT1 MODEL
VIDEO GAME
CAMCORDER
