background image

6

If an outside antenna is connected to the TV set, be sure the
antenna system is grounded so as to provide some pro t e c t i o n
against voltage surges and built-up static charges. Section 810
of the National Electrical Code provides information with re s p e c t
to proper grounding of the mast and supporting stru c t u re ,
g rounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna discharge unit,
connection re q u i rements for the grounding electro d e .

7

An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.

8

TV sets are provided with ventilation openings in the cabinet
to allow heat generated during operation to be released.
Therefore:
— Never block the bottom ventilation slots of a portable TV

set by placing it on a bed, sofa, rug, etc.

— Never place a TV set in a “built-in” enclosure unless

proper ventilation is provided.

— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat re g i s t e r.

9

To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secure d .
— Use only a cart or stand recommended by the TV s e t

m a n u f a c t u re r.

— Do not try to roll a cart with small casters across thresh-

olds or deep pile carpets.

— Wall or shelf mounting should follow the manufacturer’s

instructions, and should use a mounting kit approved by
the manufacturer.

USE

10

Caution children about dropping or pushing objects into the TV set
t h rough cabinet openings. Some internal parts carry hazard o u s
voltages and contact can result in a fire or electrical shock.

11 

Unplug the TV set from the wall outlet before cleaning. Do
not use liquid or an aerosol cleaner.

12

Never add accessories to a TV set that has not been designed for
this purpose. Such additions may result in a hazard .

13

For added protection of the TV set during a lightning storm or
when the TV set is to be left unattended for an extended peri-
od of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning
s t o rms or power line surg e s .

14

A TV set and cart combination should be moved with care .
Quick stops, excessive force, and uneven surfaces may cause
the TV set and cart combination to overt u rn .

SERVICE

15

Unplug this TV set from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the

operating instructions. Adjust only those controls that are
c o v e red in the operating instructions as improper adjust-
ment of other controls may result in damage and will often
re q u i re extensive work by a qualified technician to re s t o re
the TV set to normal operation.

E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in perform-

ance — this indicates a need for service.

1 6

Do not attempt to service this TV set yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service person-
n e l .

17

When replacement parts are re q u i red, have the service tech-
nician verify in writing that the replacement parts he uses
have the same safety characteristics as the original part s .
Use of manufacture r’s specified replacement parts can pre-
vent fire, shock, or other hazard s .

18

Upon completion of any service or repairs to this TV s e t ,
please ask the service technician to perf o rm the safety check
described in the manufacture r’s service literature .

19

When a TV set reaches the end of its useful life, improper dis-
posal could result in a picture tube implosion. Ask a qualified
s e rvice technician to dispose of the TV set.

20

Note to CATV system installer.
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that pro-
vides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

Содержание AV-20120





























Отзывы: