10
EN
INSTALLING DV CAPTURE DRIVERS
Caution
• In case the DV Capture Board has been installed with Windows
®
95, these steps are not
required.
FOR WINDOWS
®
98
Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you
have not done so already, install the DV Capture Board (see p. 8). Follow these steps to install
the drivers. If you make a mistake during the install procedure, click the
Back
button and
correct the mistake.
1
Turn on your computer. Put the included
JVC CD-ROM in your CD-ROM drive.
The New Hardware Found Window is
displayed.
If the New Hardware Found Window is
not displayed click the
Start
button on
the Task Bar and select
Shut Down
. In
the Shut Down Windows window select
Restart
the computer and click
OK
.
2
The Add New Hardware Wizard is
displayed.
Click the
Next
button.
3
Make sure
Search for the best driver for
your device. (Recommended).
is
selected. Then click the
Next
button.
