JVC 1105RYMMDWJEIN Скачать руководство пользователя

Страница: 54 / 63

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step

again.

Select and play any source.

• Surround/DSP modes are not available when selecting “A

MULTI” in the audio input setting (see page 20) or when
multi channel PCM (see page 47) signals recorded in DVD-
Audio are coming in.

• Make sure you have selected the input mode (analogue or

digital) correctly.

Press SURROUND.

MULTI JOG now works for selecting Surround/DSP modes.

Turn MULTI JOG to select the Surround/DSP
mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital

multi-channel software:

“AUTO SURROUND” is the initial setting.

Available Surround modes vary depending on the speaker
settings and the incoming signals. For details, see page 49.

If an incoming signal is a multi-channel (more than 2

channel) digital signal, “MONO FILM” is not available.

If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is

not available.

To cancel Surround/DSP modes

Turn MULTI JOG so that “SURROUND OFF” appears on the
display.

When you select “AUTO SURROUND”

You can enjoy the Surround mode easily.
• For details about the Surround modes, see page 49.
• When “AUTO SURROUND” is activated, the AUTO SURR indicator

lights up on the display.

How does “AUTO SURROUND” work?

• If a multi-channel signal comes in, an appropriate Surround

mode will be selected automatically.

• If a Dolby Digital 2-channel signal with surround signal comes

in, “PLIIx MOVIE” or “PLII MOVIE” will be selected.

• If a Dolby Digital 2-channel signal without surround signal

comes in, “SURROUND OFF (stereo)” will be selected.

• If a Linear PCM signal comes in, “SURROUND OFF (stereo)”

will be selected.

NOTE

“AUTO SURROUND” does not take effect in the following cases:
– While playing an analogue source,
– While selecting one of the fixed digital decode mode—“DOLBY

DIGITAL” or “DTS” (see page 21).

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker
settings and the incoming signals. For details, see page 49.

Activating one of the Surround/DSP modes automatically
recalls the memorized settings and adjustments.

• To adjust the speaker output level,

see page 37.

• When activating one of the Surround/DSP modes,

you

can adjust CENTER TONE. (See page 39.)

• When activating one of the Surround/DSP modes

(except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and
ALL CH STEREO),

you can adjust CNTR ALIGNMENT.

(See page 39.)

• When activating “NEO:6 MUSIC,”

you can adjust CENTER

GAIN. (See page 39.)

• When activating the DSP mode (except ALL CH

STEREO),

you can adjust the following settings:

EFFECT (see page 38)
LIVENESS (see page 39)
ROOM SIZE (see page 38)

• When activating “PLIIx MUSIC” and “PLII MUSIC”,

you

can adjust the following settings:

CENTER WIDTH (see page 39)
DIMENSION (see page 39)
PANORAMA (see page 39)

Selecting the Surround/DSP modes

From the remote control:

Select and play any source.

• Surround/DSP modes are not available when selecting “A

MULTI” in the audio input setting (see page 20) or when
multi channel PCM (see page 47) signals recorded in DVD-
Audio are coming in.

• Make sure you have selected the input mode (analogue or

digital) correctly.

Press SURROUND repeatedly to select the
Surround/DSP mode you want.

Ex.: When “DOLBY DIGITAL” is selected for Dolby Digital

multi-channel software:

“AUTO SURROUND” is the initial setting.

Available Surround modes vary depending on the speaker
settings and the incoming signals. For details, see page 49.

If an incoming signal is a multi-channel (more than 2

channel) digital signal, “MONO FILM” is not available.

If “SURROUND SPK” is set to “NO,” “ALL CH STEREO” is

not available.

To cancel Surround/DSP modes

Press SURROUND repeatedly so that “SURROUND OFF”
appears on the display.

1,3

S.WFR LFE

DIGITAL

DIGITAL AUTO

SURROUND OFF

(Back to the beginning)

Surround modes

AUTO SURROUND

HALL1

HALL2

LIVE CLUB

DANCE CLUB

PAVILION

THEATRE1

THEATRE2

MONO FILM

ALL CH STEREO

S.WFR LFE

DIGITAL

DIGITAL AUTO

SURROUND OFF

(Back to the beginning)

Surround modes

AUTO SURROUND

HALL1

HALL2

LIVE CLUB

DANCE CLUB

PAVILION

THEATRE1

THEATRE2

MONO FILM

ALL CH STEREO

46-50RX-D701S[B]_f.p65

05.11.7, 2:54 PM

Содержание 1105RYMMDWJEIN
































































Результаты поиска

Содержание 1105RYMMDWJEIN

Отзывы:

Похожие инструкции для 1105RYMMDWJEIN

Бренды по названию

Популярные бренды

JVC 1105RYMMDWJEIN, Инструкция по эксплуатации

Результаты поиска

Содержание 1105RYMMDWJEIN

Отзывы:

Похожие инструкции для 1105RYMMDWJEIN

Бренды по названию

Популярные бренды