background image

12

Using the Tuner

You can listen to FM and AM (MW) stations. Stations can
be tuned in manually, automatically, or from preset memory
storage.

Before listening to the radio:
• Make sure that both the FM and AM (MW) antennas 

are correctly connected. (See pages 5 and 6).

One Touch Radio 

Just press the FM/AM button on the Remote Control to turn
on the System and start playing the station you were last
tuned to.

You can switch from any other sound source to the radio 
by pressing the FM/AM button. 

Tuning In a Station

1

Press the FM/AM button.

The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be-
tween FM and AM (MW).
• You can also select the band by turning the Source 

selector on the Unit.

2

Select a station using one of the follow-
ing methods.

Manual Tuning

Press the 

¢

 or 

4

 button on the Unit or the 

or

∞ 

button on the Remote Control repeatedly to move

from frequency to frequency until you find the station
you want.

OR

Auto Tuning

If you press and hold the 

¢

 or 

4

 button on the

Unit or the 

or

 

∞ 

button on the

 

Remote Control

for one second or more, the frequency changes up, or
down, automatically until a station is found.

OR

Preset Tuning using the Remote Control 
(Possible only after presetting stations)

Select the desired preset number using the 

3

 

or

 

2

button on the Remote Control. The display will show
the preset number’s band and frequency.
• You can also select the desired preset number 

using the Numeric Keys. See “Entering the 
Number with the Remote Control” on page 11. 
(e.g. Press +10, and then 2 for number 12.)

Example:

Press the 

3

 button until the preset number “2” ap-

pears.

5

2

FM/AM

Multi-control 
button

* When the System is in use, the display shows other items as well.

For simplicity, we show here only the items described in this section.

SET

FM/PLAY MODE

3

Program type indicator

Band display, Preset channel, 
Frequency display

Numeric

Keys

Source 
selector

¢

4

RDS DISPLAY

PTY SEARCH

PTY /–

TA/News/Info

FM mode indicator

RDS indicator

(On the Remote Control)

(On the Unit)

DOWN

UP

3

3

Preset number

or

FS-X5(B)_E.book  Page 12  Friday, March 28, 2003  2:49 PM

Содержание 0403MNMCREJEM



































Отзывы: