JVC KENWOOD KMM-BT208, Инструкция по эксплуатации

Страница: 17 / 40

ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth®
[NUMBER DIAL] 1 Turn the volume knob to select a number (0 to 9) or character ( , #,
+).
2 Press
S
/
T
to move the entry position.
Repeat step 1 and step 2 until you finish entering the phone number.
3 Press the volume knob to call.
(or using the remote control)
1 Press the number buttons (0 to 9) to enter the phone number.
2 Press to call.
[VOICE] Speak the name of the contact you want to call or the voice command to
control the phone functions. (See also the following “Make a call using
voice recognition”.)
[LOW] / [MID] / [FULL] : Shows the strength of the battery.*
[NO SIGNAL] / [LOW] / [MID] / [MAX] : Shows the strength of the current received signal.*
* Functionality depends on the type of the phone used.
Make a call using voice recognition
1 Press and hold to activate the voice recognition of the connected
phone.
2 Speak the name of the contact you want to call or the voice command
to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select [CALL HISTORY] , [PHONE BOOK] or
[NUMBER DIAL]
, then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4 Press and hold one of the number buttons (1 to 6).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select [NUMBER DIAL] in step 2,
store a blank number in step 3 and proceed to step 4.
Make a call to a registered number
1 Press to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3 Press the volume knob to call.
“NO MEMORY” appears if there is no contact stored.
Bluetooth mode settings
1
Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select an item (page 18), then press the
knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
KMM_BT408_MN_B5A-3850-00_EN.indd 17 KMM_BT408_MN_B5A-3850-00_EN.indd 17 1/27/2022 12:15:22 PM 1/27/2022 12:15:22 PM