JVA SMS Gateway User Manual
8
Basic Commands
The following is the minimum commands you will need to know to get your JVA SMS Gateway working.
It assumes the PIN is still set to the default of 1234.
When you have installed and powered on your unit for the first time, the connected energiser(s) are
powered on, and the GSM light is flashing once every 2 seconds, issue a status command
1234 s
The unit will reply with a summary of all connected energisers.
Next, add your number to the report list. Send
1234 a
The unit will reply with “<your number> has been added to the report list”
Now try arming you energiser(s) by sending
1234 on
You should see the energiser(s) arm, and receive an sms saying “Energiser(s) are on”. Now disarm the
energiser(s) by sending
1234 off
You will see the energiser(s) disarm and receive another confirmation message. For a complete list of
commands, refer to the section “Command Summary”.
