Preparation of the JUWEL Eccoflow SeaSkim Pump
Attach the venturi nozzle (C) to the connection ring (B) of the pump (A). Check the
correct positioning of the venturi nozzle in accordance with the illustration.
A
B
C
Preparation SeaSkim
- Remove the housing lid as well as the foam collector and retrieve the separation wall
from the housing.
- Assemble the pump and attach the venturi nozzle to the adapter.
- Slide the pump into the designated retainer of the separation wall (1) and route the
power cable through the lower cable guide of the separation wall.
- Attach the air controller to the end of the hose (2).
- Connect the air hose to the venturi nozzle (3) and route it through the upper hose
guide in the separation wall.
- Route the air pressure controller through the mountings of the separation wall.
- After you have attached the air pressure controller to the pump, connect it to the
top end by turning to the right (4).
- Insert the separation wall into the housing (5) and install the distance pieces on the
housing (6).
- Install the foam collector and the housing lid (7). Check the correct positioning of
the sealing ring on the foam collector. Route the air hose through the mounting of the
housing lid.
- Attach the outlet nozzle to the housing of the SeaSkim (8).
2
4
3
1
5
7
6
8
4
