juwel SeaSkim, Инструкция по эксплуатации, Страница: 8 / 12

SeaSkim Maintenance of the JUWEL Eccoflow Pump
The JUWEL Eccoflow SeaSkim pump should be checked and cleaned at regular intervals (at least once a month).
Please proceed as follows:
1. Disconnect all electrical devices that are operated inside the water.
2. To now remove the pump from the SeaSkim, proceed as described in the "Maintenance JUWEL SeaSkim Quarterly" section.
3. Remove the venturi nozzle (C) from the pump and disconnect the connection ring (B) from the motor by turning it anti-clockwise.
4. Remove the impeller (A) and the axle with their rubber bearings from the motor.
5. Thoroughly clean all components.
It is necessary to remove the impeller from the chamber and remove deposits and dirt from the chamber itself as well as the impeller.
Use the cleaning brush included with the pump for this purpose. Otherwise the functionality of the pump will be impaired. Also check
the impeller for damage and possible signs of wear of the magnet.
6. After that, and before you reconnect the devices that are operated inside the water to the power supply, please reinstall the SeaSkim
pump in reverse order and reinsert it in the SeaSkim.
8