juwel SeaSkim, Инструкция по эксплуатации, Страница: 4 / 12

JUWEL SeaSkim
The JUWEL SeaSkim combines the product benefits of an internal skimmer characterised by the fact that no water exits the aquarium
with a compact shape and high skimming capacity.
With output of 1500 l/h, the integrated pump air intake of 150 l/h and consequently ensures effective protein skimming for seawater
aquariums with a volume of 100 - 500 litres. However, the JUWEL SeaSkim does not serve as filter system replacement in the seawater
aquarium.
The skimming utilises the fact that many so-called surface-active substances accumulate at the boundary between water and air,
especially in saltwater. This includes proteins and their first stages of decomposition (these contain the undesired elements nitrogen
and phosphorus), but also smallest dirt particles (solids) etc.
Installation in JUWEL aquariums
The JUWEL SeaSkim is intended for installation in the JUWEL Rio, Lido, Vision and Trigon aquariums. These Juwel aquariums are
characterised by the fact that an opening for the SeaSkim is already available and closed by means of a cap. Remove the cap closing the
cover
Recommendation: Flap set for JUWEL SeaSkim
If the cover of your JUWEL aquarium does not include a special opening for SeaSkim, we recommend that you contact your specialist
retailer.
The matching flap set for SeaSkim can be purchased there as an original JUWEL spare part.
Installation of the mount for the JUWEL SeaSkim
The SeaSkim is permanently installed by means of the mount included in the delivery. This ensures the correct position in the aquarium
and consequently optimum skimming results. The aquarium should be emptied to such an extent that you may wipe the panes dry.
You achieve the correct position by using the enclosed template for positioning the mount.
1. Initially fold the template at the designated lines and align it in the manner detailed below.
2. Aquarium model RIO, LIDO, VISION:
Hang the template from the inside over the edge of the frame of the left side pane and align it at the rear left corner (ref. figure A).
2. Aquarium model TRIGON:
Hang the template with a distance of 25 cm to the rear outer edge of the frame from the inside over the edge of the frame of the left
side pane (ref. figure B).
3. Secure the template by means of an adhesive strip in order to avoid shifting.
4