7
6
SAFETY PRECAUTIONS:
1. READ ALL ASSEMBLY, OPERATING INSTRUCTIONS BEFORE USE
2. Please make sure Rollator is fully opened, seat is down and the
Folding Bar under seat is pushed down, locked into position.
3. Make sure all knobs, nuts, bolts are fully tightened. Check
regularly to ensure they are secure at all times.
4. Make sure the Rollator is level. Make sure the handles are at
the same height.
5. Test the Rollator for stability before applying full weight to
hand grips or seat.
6. Test brakes before using.
7. ALWAYS LOCK BRAKES BEFORE SITTING, please refer
to Operating Instructions, #3 Brakes and image 10.
8. Replace tires when significantly worn or damaged.
9. Caution: Keep hands clear of frame when folding.
10. Maximum weight capacity 400 lbs.
• Push the Hand Brakes DOWN into their locking
position and check to ensure that the metal brake
shoes engage the wheels and stop the Rollator.
(image 10 previous page and images 11 & 12).
5. HAND BRAKE ADJUSTMENT
• Hand Brakes should be in working order after
assembly.
• However brakes can loosen during normal use.
TIGHTEN BRAKES
• Place Rollator upright on floor.
• Loosen nut at top of brake shoe assembly,
near back wheel. Turn
counter-clockwise
until
desired tension is achieved (see image 13).
• Test by squeezing hand brake — ensure that
metal brake shoe fully engages the wheel.
LOOSEN BRAKES
• Place Rollator upright on floor.
• Loosen nut at top of brake shoe assembly,
near wheel. Turn
clockwise
until desired
tension is achieved (see image 13).
• Test by squeezing the hand brake to ensure that
the metal brake shoe fully engages the wheel.
• Adjust as neccessry.
11
12
13
Call Juvo Products
Customer Service
Toll Free: 1.844.277.6191
with any questions
