0845 1204582
www.justkampers.com
JK part numbers:
J13641 and J13642
OEM part number:
Not applicable
Just Kampers, Unit 1 Stapeley Manor, Long Lane, Odiham, Hants. RG29 1JE
NB. Please note that whilst every attempt is made to ensure that these instructions are as
accurate and clear as possible, we cannot be held responsible for misinterpretation of these
instructions or for any subsequent accident or damage caused through mis-fitted parts.
Tech Sheet
Spot Colour Pantone 653
Spot Colour P653/P151
Spot Colour White out
4 Colour Blue
4 Colour White out
4 Colour Blue/Orange
Black
White
Spot Colours
Process Colours
Page 2 of 5
The awning kit contains:
1x awning material, 1x groundsheet, 1x inner tent, 1x roof condensation sheet, 2x curtains, (a)=74x plastic groundsheet
pegs, (b)=3x gutter clamps, (c)=1x centre pole, (d)=2x side poles, (e)=4x 25mm diameter curved roof poles, (f)=2x
22mm diameter curved roof poles, (g)=4x adjustable leg poles, (h)=2x ‘L’ shaped poles, (i)=2x sun canopy poles, (j)=1x
vehicle gutter pole, (k)=40x metal tent pegs, (l)=1x ‘T’ shaped pole.
Step One
Firstly, on the left is an exploded view of all the main
awning poles in their correct positions. This part of the
awning requires the four ‘curved’ 25mm diameter roof
poles (e). After pushing all of these poles together you
should end up with the basic frame of the awning.
Note: Keeping the legs on their shortest setting at this
stage will make fitting the awning material much easier.
Step Two
The next step is to lay the awning material over the top
of the frame.
Starting at the front of the awning, there are three holes
in the material which correspond with three protruding
frame poles. Once the three short poles are pushed
through the matching holes in the material you can pull
the remaining fabric over the frame.
1. Assemble main awning poles
2. Lay awning material over the top of the frame
(a)
(b)
(c)
(d)
(e) (f)
(g)
(h)
(i)
(j)
(k)
(l)
(g)
(e)
(g)
(d)
(front)
(e)
(c)
(e)
(d)
(e)
(g)
(g)
(back)
