background image

JK ‘retro’ driveaway frame awning

Before you start

Thank you for purchasing our JK Retro frame awning. 

Please read these instructions to ensure a fault free time 

with your new awning.

•  A trial set-up is essential before your intended 

journey, to check that all parts are included and 
that you are aware of the set-up procedure. 

•  Your awning should be set up on an even, clean 

surface, ideally with the front door facing downhill. 

•  Try to avoid opening onto hedges, large rocks or 

setting up directly under trees due to lightning danger, 
continued dripping after rain and falling tree debris. 

•  Tent pegs should be inclined away from 

the awning to achieve the best stability. 

•  Zippers should be closed during set up procedure. 

Please handle these with care, as these are wear 
and tear items that are not covered by the warranty. 

•  Do not touch the fabric when it is wet, as these 

touch points will become permeable and water 
will leak through. The thread contains some cotton 
which expands when wet, it is advisable to treat 
the seams with a seam sealer from time to time. 

•  Condensation may appear and should not 

be confused with water leakage. The risk of 
condensation can be reduced with proper 
ventilation, a roof condensation sheet is included. 

Putting away

To prevent mildew you should ideally dismantle the 
awning when it is completely dry. If this is not possible 
you should unpack your awning and dry as soon as 
possible. If packed away damp, you may need to 

 

re-waterproof the fabric before using it again.
Store your awning in a dry, cool and well ventilated place.

Maintenance

Use clean water for cleaning. For spots you can use an 
awning cleaner. NB: Awnings should never be washed in 
the washing machine or treated at a dry cleaning agent.
Poles must be stored clean and dry.
Zippers should be treated with Zip Ease from time to 
time.
Please keep this information for future reference and pay 
careful attention to the instructions. This will prolong 
the working life of your awning.

Awning tie down kits

We recommend that you use an awning tie down kit to 
prevent damage in adverse weather. Damage caused by 
weather conditions is not covered under warranty.
 

Fire safety

Do not use cookers, stoves, heaters or lamps close to 
the awning canvas.
Always read the fire drill instructions where you are 
staying and know where extinguishers are on site. We
recommend for extra safety, carrying your own 
extinguisher.

Available for left hand drive (J13642) 

and right hand drive (J13641) vehicles

JK part numbers:  

J13641 and J13642
OEM part number:  

Not applicable

Tech Sheet

Spot Colour Pantone 653

Spot Colour P653/P151

Spot Colour White out

4 Colour Blue

4 Colour White out

4 Colour Blue/Orange

Black

White

Spot Colours

Process Colours

Page 1 of 5

0845 1204582

www.justkampers.com

Just Kampers, Unit 1 Stapeley Manor, Long Lane, Odiham, Hants. RG29 1JE

NB. Please note that whilst every attempt is made to ensure that these instructions are as 

accurate and clear as possible, we cannot be held responsible for misinterpretation of these 

instructions or for any subsequent accident or damage caused through mis-fitted parts.

Содержание Retro J13642






Отзывы: