background image

8

IMPRESSA Z5 – Quick Reference Guide

The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of 
calcification depends on the degree of hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this 
can cause irritation.

Avoid contact with the skin or eyes.
Rinse the descaling agent off with clean water. Should you get 
any descaling agent in your eye, consult a doctor.

If the wrong descaling agent is used, the machine could be dam-
aged and/or traces of detergent could be left behind in the water.

Use only original JURA care products.

If the descaling operation is interrupted, there may be damage to 
the machine.

Allow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces, 
damage cannot be ruled out.

Clean up any splashes immediately.

The descaling programme lasts approx. 45 minutes.
JURA descaling tablets are available from stockists.
If you use a CLARIS filter cartridge and this is activated, you 
will not be prompted to descale the machine.

Precondition

COFFEE READY

 / 

DESCALE

 is displayed and 

the maintenance button 

c

 lights up.

 c T

 Press the maintenance button.

DECALCIFYING TIME 45 MIN

 / 

START YES

If you want to descale the machine at a later point in time, turn 
the Rotary Switch until 

DECALCIFYING

 / 

START NO

 is 

displayed. Exit the maintenance programme by pressing the 
Rotary Switch. The prompt ‘Descale machine’ remains on the 
display.

T
T

T

T

T

E
E
E

E

Descale machine

Descale machine

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

Содержание The IMPRESSA Z5 - Generation II













Отзывы: