background image

7

IMPRESSA X

S

95/X

S

90 One Touch – Quick Reference Guide

The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of 
calcification depends on the degree of hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this 
can cause irritation.

Avoid contact with the skin or eyes.
Rinse the descaling agent off with clean water. Should you get 
any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam-
aged and/or traces of detergent could be left behind in the water.

Use only original JURA ca re products.

If the descaling operation is interrupted, there may be damage to 
the machine.

Allow the descaling program to run to the end.

If the descaling agent comes into contact with sensitive surfaces, 
damage cannot be ruled out.

Clean up any splashes immediately.

The descaling programme lasts approx. 45 minutes.
JURA descaling tablets are available from stockists.
If you use a CLARIS plus filter cartridge and this is activated, 
you will not be prompted to change the filter.
Remove the CLARIS plus filter cartridge, if installed, before de-
scaling the machine.

Precondition

COFFEE READY

 / 

DECALCIFY MACHINE

 is 

displayed and the maintenance button 

c

 lights up.

 c T

 Press the maintenance button.

DURATION 45 MIN.

 / 

START YES

If you want to descale the machine at a later point in time, turn 
the Rotary Switch until 

START NO

 is displayed. Exit the 

maintenance programme by pressing the Rotary Switch. The 
prompt ‘Decalcify machine’ remains on the display.

T
T

T

T

T

E
E
E

E

E

Descaling the machine  

Descaling the machine  

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

Содержание IMPRESSA XS90 ONE TOUCH













Отзывы: