16
24. Messages
Cause
Action
FILL WATER TANK
The tank is empty
Top up with water
The water level display in the tank has jammed
Empty tank, rinse out and replace when it has
been filled
The tank is scaled; the water level display is
Remove the tank, de-scale it, rinse well,
jammed
fill and put in again
FILL COFFEE BEANS
The bean container is empty
Fill up with beans
Although beans have been filled, the display
Draw off a cup of coffee.
does not go off
“FILL BEANS” only goes off after a draw-off
A foreign body has got jammed
Remove the foreign body as described in
Section 16.8 “Removing foreign objects”
EMPTY DRAWER
The grounds container is full
Remove the tray, empty the grounds container,
replace the tray
The display appears after
Leave the machine switched on while the grounds
only a few cups
container is emptied.
The counter is only reset if the machine is
switched on.
DRIP TRAY MISSING
The drip tray has not locked in properly
Position the tray correctly.
EMPTY DRIP TRAY
The drip tray is full
Carefully remove the tray, empty it, rinse it out
and replace it
The display does not go off despite the tray
Remove the tray, clean the metal contacts,
being emptied
see Chapter 16.11
CLEANING NECESSARY
220 draw-offs or 180 rinsings have been done
Carry out cleaning according to Chapter 19
The display does not go off
Do the cleaning once more;
despite the cleaning
but do not add a cleaning tablet this time
DECALCIFYING
The machine must be de-scaled
Carry out de-scaling as described in Chapter 20
NECESSARY
The display does not go off
De-scale the machine again; this time only with
despite the de-scaling
water, without de-scaling agent
MALFUNCTION
Various causes
Call the office trader
25. Problems
Problems
Cause Action
Coffee only drips out
– powder too fine
– adjust grinder to a coarser grinding
when drawing off
– run one or two rinse programmes.
–
If the results are no better, clean
–
the machine.
Coffee flow is stopped after
– not enough powder in the system
– draw off one cup of coffee
the pre-brew
Grinder is very noisy
– foreign object in the grinder
– refer to Chapter 16.8
Not enough froth when
– Cappuccino blocked
– carry out a Cappuccino cleaning
frothing milk
–
(refer to Chapter 17)
Device cannot be
– Main switch (Fig. 1/II) not switched on
– switch on
switched on with the
ON/OFF switch
– Flat not engaged properly
– close flap
If the messages or problems nevertheless still persist, please get in touch with your dealer or directly with the firm of
JURA Elektroapparate AG.