12
When steam is first drawn off, there is a possibility of spat-
tering. The pivoting nozzle becomes hot. Avoid direct
contact with the skin.
11. Switching off machine
When the machine is switched off, the rinsing program is auto-
matically run again. Therefore place an empty container under the
coffee-spout (15) and press ON/OFF key
. When the rinsing
water has run into the container, the machine powers down.
Discard the water.
12. Programming
Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
The following settings can be programmed:
Powder quantity
Brewing temperature
Water quantity
Filter
Water hardness
Economy mode
Timer clock
Automatic switch on time
Automatic switch off time
Supplies and cup counter
Language selection
12.1 Programming POWDER QUANTITY
Switch the machine on by pressing ON/OFF key
.
Press key
until you can hear an acoustic signal.
P
POWDER QUANTITY / SELECT KEY
Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
POWDER
–
··········
II
··········
+
The powder quantity can be selected by pressing keys
or
briefly.
To store the new powder quantity in memory briefly press
key
.
POWDER QUANTITY / SELECT KEY.
You can go to the next setting by pressing key
.
12.2 Programming coffee temperature
TEMPERATURE COFFEE / SELECT KEY
Now press the key that you want to programme.
Select the required temperature (high or normal) by activating
key or .
To store the new coffee temperature in memory briefly press
key
.
TEMPERATURE COFFEE / SELECT KEY
You can call up the next setting by pressing key
.
12.3 Programming water quantity
WATER QUANTITY / SELECT KEY
Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
The selected value is confirmed
Now your machine prepares a coffee.
ENOUGH COFFEE / PRESS KEY
OK?
–
··········
II
··········
+
P
P
+
P
-
+
+
P
-
+
