9
Pull the plug and the feed wire out of the wire box on the back
of the machine.
Put the plug in.
Do
not
switch the machine on.
Press the
draw-off key for about 3 seconds. Now, the ,
,
,
symbols light up.
Now select the corresponding level with the
draw-off key
and press the ON/OFF
switch in order to save the setting.
The symbols go off.
The water hardness only need to be set before the first use of
the machine or if a different water quality is used.
If you do not carry out a change of level for longer than 30
seconds, the display goes off. The last figure you have stored
remains valid.
3.7 Adjustable automatic switch-off
You can amend the automatic switch-off time of 1 1/2 hours set by
Jura. The machine offers you three levels for this:
1st level
The
symbol lights up. The automatic switch-off is not acti-
vated.
2nd level
The
,
,
symbols light up.
The automatic switch-off is set to 1 1/2 hours.
3rd level
The
,
,
,
, , symbols light up.
The automatic switch-off is set to 3 1/2 hours.
In order to set or alter the automatic switch-off time, please
proceed as follows:
Connect the plug with the mains.
However, do
not
switch the machine on.
Please the
draw-off key for about 3 seconds. The
,
,
symbols light up.
Select the required level with the
draw-off key.
Press the ON/OFF
switch in order to save the required level.
If you do not carry out a change of level for longer than 30
seconds, the display goes off. The last figure you have stored
remains valid.
4. First start of operation
4.1 Fill system with water
Switch your machine on with the ON/OFF
switch.
The
symbol lights up.
Place an empty cup under the pivoting nozzle for hot water/
steam (13).
Switch the selector switch for hot water/steam (12) to the
position. The machine now lets off water and the
symbol
flashes at the same time.
If the
symbol lights up on the display, turn the selector
switch for hot water/steam (12) back to the
position.
E
