17
E
16. Messages
Display
Cause
Action
– System empty
– Fill system (see point 4.1)
– System too hot after drawing off steam
– Reset to coffee stand-by
– Wrong position of selector switch
– Put selector switch into correct position
– General troubles
1. – Switch off
– disconnect from mains
– connect to mains
– switch machine on
2. Have machine examined by Jura service
centre
– Machine needs rinsing
Rinsing the machine
– The tank is empty
– Fill with water
– Floater defective
– Rinse out or de-scale water tank
– Grounds container full
– Empty grounds container
– Tray replaced too early after emptying
– Only replace the tray after about 10 sec.
