background image

11

lights up, 

lights up

Open the cover of the filler funnel for pre-ground coffee (9).

Fill 1 or 2 level spoonfuls of pre-ground coffee in the filler
funnel for pre-ground coffee (9) (Fig. 11) and close the cover.

Press the required draw-off key for 1 cup 

(5) or 2 cups 

(3).

flashes, lights 

up

Turn the water quantity switch (1) again to select the water
quantity individually:

Your product is being prepared.

lights up

11. Drawing off hot water

Install the hot water jet (see Fig. 5) to obtain perfect water
flow. Do not replace the replaceable hot water jet (14)
directly after drawing off water, because the jet is hot after
the draw-off operation.

At the start of the water draw-off operation there can be
splashing  Avoid direct contact with the skin!

lights up

Place a cup under the replaceable hot water jet (14).

Open the steam / hot water draw-off tap (Fig. 13).

flashes

Press the maintenance key 

(4).

If the required water quantity is reached, close the steam / hot
water draw-off tap (12).

lights up

You can adjust the water quantity before the draw-off opera-
tion using the water quantity switch (1). The adjusted value
(ML) refers to 1 cup.

You can stop the process of making coffee at any time by
pressing key 

(5) or 

(3).

lights up

Put 2 cups under the adjustable coffee spout (15).

Press the draw-off key for 2 cups 

(3).

flashes, lights 

up

Your product is being prepared.

lights up

10. Drawing off pre-ground coffee

Never use instant coffee or quick-coffee. We recommend
that you always use powder from fresh coffee beans or, pre-
ground, vacuum-packed coffee. Never fill in more than 2
portions of powder. The pre-ground coffee tank is no storage
tank. Make sure that the pre-ground you use is not too fine.
This may cause blocking of the system. In this case the
coffee only drips out of the coffee spout.

If you have filled in too little powder, the symbols 

will

flash alternately for a short period of time. Your IMPRESSA
E10/20/25 stops the process. Restart the process. 

You can stop the process of making coffee at any time by
pressing key 

(5) or 

(3).

lights up

Put 1 or 2 cups under the adjustable coffee spout (15).

Press the powder coffee selection key (2).

E

Содержание IMPRESSA E10






















Отзывы: