21
2 Preparation
T
Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
‘Saved’
appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’
appears on the display.
E
You can alter this setting at any time by repeating the above
procedure.
E
The amount can be permanently adjusted to the cup size for
the products shown in the product selector too. To do this,
press and hold the Rotary Switch
k
until
‘Enough coffee?
Press button.’
appears.
E
You can also permanently set the amount for all speciality
coffees, milk and hot water in programming mode (see Chap-
ter 4 ‘Permanent settings in programming mode – Adjusting
the product settings’).
The following temperatures can be selected for preparing hot water:
‘Low’
,
‘Normal’
,
‘High’
.
There is a danger of scalding from hot water splashes.
T
Avoid direct contact with the skin.
Precondition:
‘Please select product:’
is displayed.
T
Place a cup under the hot-water spout.
T
Press the
‘Hot water’
button.
‘Hot water’
and the temperature are displayed.
E
By pressing the
‘+’
or
‘ –’
button
(within approximately 2 sec-
onds)
you can set the temperature to your individual prefer-
ence. This setting is not saved.
‘Hot water’
, hot water flows into the cup. Preparation stops
automatically when the preset amount of water is reached.
‘Please select product:’
appears on the display.
Hot water
J
CAUTION
