Jura GIGA 5, Инструкция по эксплуатации

Страница: 28 / 64

28
4 Permanent settings in programming mode
Product Coffee strength Amount More settings
Two cappuccini,
two caffè latte,
two espressi
macchiati,
two latte macchiati – Water: 0.5 oz – 8.0 oz
(25 ml – 240 ml)
Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
(per cup) Temperature (low,
normal, high),
grinder on the left and/or
right (as %)
Portion of milk
foam,
portion of milk – Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec. –
Two portions of milk
foam,
two portions of milk – Milk: 0 sec. – 120 sec.
Milk foam:
0 sec. – 120 sec.
(per cup) –
Hot water – Water: 0.5 oz – 15.0 oz
(25 ml – 450 ml) Temperature (low,
normal, high)
E
In addition to the settings listed, you can reset the values for
all products to the factory settings.
Example: Proceed as follows in the ‘Expert mode’ to change the
amount of milk for a latte macchiato from ‘4 sec.’ to ‘6 sec.’ , the
amount of milk foam from ‘12 sec.’ to ‘14 sec.’ and the amount of
water from ‘1.5 oz’ (45 ml) to ‘1.0 oz’ (40 ml).
Precondition: ‘Please select product:’ is displayed.
O T
Press the P button.
‘Maintenance status (1/5)’
g T
Turn the Rotary Switch until the program item ‘Product set-
tings (2/5)’ is displayed.
T
Press the ‘Expert mode’ button.
‘Expert mode’
E
Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E
You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T
Press the ‘Latte macchiato’ button.
T
Press the ‘Amount of milk’ button.