17
4 Permanent settings in programming mode
pt
es
en
it
fr
ru
en
de
(see Chapter 5 ‘Maintenance – Descaling the
water tank’).
U
Traces of milk and coffee may stick to the top
and bottom of the cup platform. If this
happens, clean the cup platform.
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a specialty coffee has been
prepared. If milk has been prepared, you will also
be prompted to clean the milk system.
Precondition:
READY
is displayed.
T
Place a receptacle under the dual spout.
Q
T
Press the On/Off button to switch the
machine off.
E
If milk has been prepared, you will be
prompted to clean the milk system
(
M-CLEAN
/
START ?
). After 10 seconds
the switch-off process continues
automatically.
RINSING
, the system rinses itself. The
operation stops automatically. Your ENA is
switched off.
4 Permanent settings in
programming mode
Products
J
WARNING
Hot coffee, hot steam and hot water can cause
scalding. Scalding is a serious burn.
T
Use extreme care when handling hot liquid
or steam.
T
Allow liquid to cool down before drinking.
T
In the event of scalding, rinse affected area
with cold water and seek medical attention.
T
Keep children AWAY.
You can make the following permanent settings:
U
Espresso
U
Amount of water:
0.5 OZ
–
2.5 OZ
(15 ml – 80 ml)
U
Coffee strength: 10 levels
U
Temperature:
NORMAL
,
HIGH
U
Coffee
U
Amount of water:
0.5 OZ
–
8.0 OZ
(25 ml – 240 ml)
U
Coffee strength: 10 levels
U
Temperature:
NORMAL
,
HIGH
U
Latte macchiato
and
cappuccino
U
Amount of milk foam:
3 SEC
–
120 SEC
U
Interval:
0 SEC
–
60 SEC
U
Coffee strength: 10 levels
U
Amount of water:
0.5 OZ
–
8.0 OZ
(25 ml – 240 ml)
U
Temperature:
NORMAL
,
HIGH
U
Milk foam
U
Amount of milk foam:
3 SEC
–
120 SEC
U
Hot water
U
Amount of water:
0.5 OZ
–
15.0 OZ
(25 ml – 450 ml)
Permanent settings in programming mode always
follow the same model.
Example:
Permanently change the coffee strength
(
FLAVOUR
) of an espresso.
Precondition:
READY
is displayed.
T
Press and hold
the Rotary Switch until
RINSE
appears.
T
Turn the Rotary Switch until
PRODUCT
is
displayed.
T
Press the Rotary Switch to enter the
program item.
SELECT BUTTON
E
Next select the button of the product for
which you would like to make settings. No
product is prepared at this point.
<
T
Press the Espresso button.
ESPRESSO
WATER
