15
2 Preparation
pt
es
en
it
fr
ru
en
de
T
Place the filler funnel for ground coffee on
the powder chute.
T
Place one level measuring spoon of ground
coffee into the filler funnel.
T
Close the powder chute for ground coffee.
SELECT BUTTON
>
T
Press the Coffee button to start preparation.
COFFEE
, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
Permanently setting the amount of water
for the cup size
It is easy to make permanent settings for the
amount of water for all specialty coffees and hot
water according to the cup size. Adjust the amount
once as shown in the following example. Every
time you prepare a drink in the future, this amount
will be dispensed.
Example: Permanently
adjust the amount of
cappuccino to the cup size.
Precondition:
READY
is displayed. Milk is
connected to the dual spout.
T
Place a cup under the dual spout.
/
T
Press and hold
the Cappuccino button until
ENOUGH MILK?
appears.
/
T
Release
the Cappuccino button.
The milk foam is prepared.
T
Press any button as soon as there is
sufficient milk foam in the cup.
OK
ENOUGH COFFEE ?
, the coffee flows
into the cup.
T
Press any button as soon as there is
sufficient coffee in the cup.
OK
,
CAPPUCCINO
, the set amounts for
one cappuccino are permanently stored.
READY
E
You can alter this setting at any time by
repeating the above procedure.
Adjusting the grinder
You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee.
NOTICE
If you adjust the consistency of grind when the
grinder is not operating, the grinder adjustment
switch could be damaged.
T
Only adjust the consistency of grind when
the grinder is running.
The consistency of grind is correct if the coffee
flows regularly from the dual spout. In addition a
fine, thick crema forms.
Example:
Change the consistency of grind
during
the preparation of an espresso.
T
Place a cup under the dual spout.
T
Open the cover cap of the grinder
adjustment switch.
<
T
Press the Espresso button to start
preparation.
T
Turn the grinder adjustment switch to the
desired position
while
the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically.
READY
