Jura ENA 8, Инструкция по эксплуатации

Страница: 22 / 34

22
5 Maintenance
J
WARNING
Harmful and irritating cleaning agent. Harmful if
swallowed. Irritating to eyes and skin.
T
Keep children AWAY.
T Avoid contact with skin and eyes.
T After contact with skin, wash immediately
with plenty of water. In case of skin irritation,
seek medical advice.
T After eye contact, immediately flush eyes
with plenty of water and seek medical
advice.
T
If swallowed, rinse mouth immediately and
drink large quantities of water. Do not
induce vomiting. Seek medical advice
immediately and show label.
E JURA milk system cleaner is available from
specialized dealers.
E To clean the milk system, use the container
supplied.
Precondition: The ‘Cleaning the milk system’ ( 6 )
symbol is displayed.
T Press the ‘ P ’ button for approximately
2 seconds to enter programming mode.
T Press the ‘Maintenance status’ button.
T Press the ‘Clean the milk system’ button.
‘Clean the milk system’
T Press the ‘Start’ button.
T Press the ‘Next’ button.
‘Milk system cleaner’
T Remove the milk pipe from the milk
container or milk cooler.
T Add milk system cleaner to the front part of
the container up to the bottom mark
(indicated by 6 ).
6
T Then fill with water up to the upper mark.
T Place the container under the dual spout.
T Connect the milk pipe to the container.
E
To connect the milk pipe to the container
correctly, the pipe must be fitted with a
connector.
T Press the ‘Next’ button.
‘Milk system is being cleaned’ , the dual
spout and the milk pipe are cleaned.
‘Fresh water’
T Rinse the container thoroughly and fill the
front part with fresh water up to the upper
mark.
T Place it under the dual spout and reconnect
the milk pipe with the container.
T Press the ‘Next’ button.
‘Milk system is being cleaned’ , the dual
spout and the pipe are rinsed with fresh
water.
The operation stops automatically. Your ENA
is once more ready for use.