Jura ENA 8, Инструкция по эксплуатации

Страница: 16 / 34

16
3 Daily operation
Daily maintenance
To ensure that you get many years of reliable
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the
drip tray. Rinse them both with warm water.
E Always empty the coffee grounds container
when the machine is
switched on.
This is
the only way of resetting the coffee grounds
counter.
T Refit the coffee grounds container and the
drip tray.
T Rinse the water tank with clean water.
T Clean the milk system in the dual spout
(see Chapter 5 ‘Maintenance – Cleaning the
milk system’).
T Remove the milk pipe and rinse it
thoroughly under running water.
T Dismantle and rinse the dual spout
(see Chapter 5 ‘Maintenance – Dismantling
and rinsing the dual spout’).
T Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfiber
cloth).
Regular maintenance
Carry out the following maintenance actions
regularly or as required:
U
In the interests of hygiene, we recommend
changing the milk pipe and interchangeable
milk spout on a regular basis (approximately
every 3 months). Replacements are available
from specialized dealers. Your ENA is equipped
with the
HP1 milk system.
U
Clean the inside of the water tank, e.g. with a
brush. Further information about the water
tank is provided in these instructions for use
(see Chapter 5 ‘Maintenance – Descaling the
water tank’).
U
Traces of milk and coffee may stick to the top
and bottom of the cup platform. If this
happens, clean the cup platform.
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a coffee specialty has been
prepared. If milk has been prepared, you will also
be prompted to clean the milk system.
T
Place a receptacle under the dual spout.
T
Press the On/Off button
Q
.
E If milk has been prepared, you will be
prompted to clean the milk system (
‘Do you
want to clean the milk system now?’ ). After
10 seconds the switch-off process continues
automatically.
‘Machine is rinsing’ , the system rinses itself.
The operation stops automatically. Your ENA
is switched off.