Jura ENA 7, Инструкция по эксплуатации

Страница: 13 / 29

13
ENA 7
If you are using the
E
Professional Cappuc-
cino Frother , set the selector switch to the
Milk Foam position
p
.
n T
Press the Steam button.
HEATING
As soon as the ENA has heated up,
READY
appears again.
l T
Turn the switch anticlockwise to position
m
.
STEAM
, the milk foam is prepared.
y T
Turn the switch clockwise to position
o
when there is sufficient milk foam in the cup.
You can continue to prepare steam for the
E
next 40 seconds or so without the machine
having to heat up again.
T
Place a cup under the coffee spout.
< T
Press the Espresso button to start prepara-
tion.
1 ESPRESSO
, the preset amount of
water flows into the cup.
Preparation stops automatically.
To make sure the cappuccino frother always works
properly, it should be rinsed and cleaned regularly
(see Chapter 5 ‘Maintenance – Rinsing the cappuc-
cino frother’).
Hot milk and milk foam
This chapter applies to the
E
Professional and
Easy Cappuccino Frothers.
Example: Proceed as follows to prepare milk foam.
Precondition:
READY
is displayed.
T
Take the protective cover off the cappuccino
frother.
T
Attach the milk pipe to the cappuccino
frother.
T
Insert the other end of the milk pipe into a
milk carton or connect it to a milk container.
T
Place a cup under the cappuccino frother.
If you are using the
E
Professional Cappuc-
cino Frother , set the selector switch to the
Milk Foam position
p
.
If you want to
E
heat the milk , turn the
selector switch of the frother to the Milk
position
t
.
n T
Press the Steam button.
HEATING
As soon as the machine has heated up,
READY
appears.
l T
Turn the switch anticlockwise to position
m
.
STEAM
, the milk foam is prepared.
y T
Turn the switch clockwise to position
o
when there is sufficient milk foam in the cup.
You can continue to prepare steam for the
E
next 40 seconds or so without the machine
having to heat up again.
To make sure the cappuccino frother always works
properly, rinse and clean it regularly (see Chapter 5
‘Maintenance – Rinsing the cappuccino frother’).
Cappuccino with the 2-stage frothing
nozzle
Precondition:
READY
is displayed, the coffee
spout is set to the ‘1 cup’ position.
T
Push the 2-stage frothing nozzle to the
lower position.
en