52
5 Maintenance
T
Touch
‘Start’
again.
‘Milk system cleaner’
T
Remove the milk pipe from the milk
container or carton.
T
Add milk system cleaner to the front part of
the container up to the
bottom mark
(indicated by
6
).
T
Then fill with water up to the
upper mark.
T
Place the container under the dual spout.
T
Connect the milk pipe to the container.
E
To connect the milk pipe to the container
correctly, the pipe must be fitted with a
connector.
T
Touch
‘Next’
.
‘Cleaning milk system’
, the dual spout and
the pipe are cleaned.
‘Fresh water’
T
Rinse the container thoroughly and fill the
front part with 250 ml of fresh water.
T
Place the container under the dual spout
and reconnect the milk pipe with the
container.
T
Touch
‘Next’
.
‘Cleaning milk system’
, the dual spout and
the pipe are rinsed with fresh water.
6
The operation stops automatically.
‘Milk
system cleaning complete’
appears briefly
on the display.
Your JURA is once more ready for use.
Dismantling and rinsing the dual spout
The dual spout must be dismantled and rinsed
daily
if milk has been prepared to make sure it
functions perfectly and also in the interests of
hygiene.
T
Remove the milk pipe and rinse it thor-
oughly under running water.
T
Press the releasing devices and pull the dual
spout down and off.
T
Press the milk system down and take it out.
