36
4 Permanent settings in programming mode
T
Turn the Rotary Switch until
‘Machine settings’
is displayed.
T
Press the Rotary Switch.
‘Machine settings’
T
Press the Rotary Switch.
‘Switch off after’
T
Move your finger across the display until
‘Display’
is dis-
played in the centre.
T
Touch
‘Display’
.
‘Display’
T
Now move your finger to the left or right to change the set-
ting.
T
Touch
‘Save’
.
‘Saved’
appears briefly on the display.
‘Display’
T
Touch
‘Back’
the number of times needed to display the start
screen again.
In the programme item
‘Machine settings’
/
‘Factory setting’
the
machine can be reset to its factory setting:
All user settings
(apart
from the ‘water hardness’) are reset to factory settings. Your GIGA
then switches off.
Precondition:
The start screen is displayed.
T
Touch
‘ P ’
.
‘Maintenance status’
T
Turn the Rotary Switch until
‘Machine settings’
is displayed.
T
Press the Rotary Switch.
‘Machine settings’
T
Press the Rotary Switch.
‘Switch off after’
T
Move your finger across the display until
‘Factory setting’
is
displayed in the centre.
T
Touch
‘Factory setting’
.
‘Factory setting’
/
‘Reset the machine to the factory set-
tings?’
T
Touch
‘Yes’
.
‘Saved’
appears briefly on the display.
Your GIGA is switched off.
Restore factory settings