Display
German
Degree
Equivalent
American
Grains
Indicator Strip
number of
"reddish" fields
Display
Level
■
■
■ ■
■ ■ ■
■ ■ ■ ■
■ ■ ■ ■ ■
The Z5 will give you the following options:
Not Active* Not Active — — —
1. extremely soft water
1-4
1-5
None
2. soft water
5-9
6-11
1 to 2
3. medium water
10-14
13-18
2 to 3
4. hard water
15-19
19-24
3 to 4
5. very hard water
20-24
25-30
4 to 5
6. extremely hard water
25 +
32 +
All 5
*Not Active: You can only use this setting for distilled water.
Level 5 and Level 6: If your tab water is very hard and falls into
these two categories, decalcifying will be frequent. In this case
bottled water is recommended.
Please note: If your water has a high calcium content (level 5 or 6)
and you use the Clearyl Filter Cartridge we recommend to decalcify
the Z5 once or twice a year (chapter 26.1).
24a. CHANGING THE WATER HARDNESS MONITOR
COFFEE READY
• Push the Rotary Dial until you hear a beep.
FILTER
• Turn the Rotary Dial until the display shows
HARDNESS 10º DH
• Push the Rotary Dial to enter the program.
• Turn the Rotary Dial until desired hardness level is displayed.
• Push the Rotary Dial to confirm the setting.
• Turn the Rotary Dial until the display shows
EXIT
.
• Push the Rotary Dial.
COFFEE READY
The Z5 will automatically remind you when it is time to decalcify
(chapter 29).
25. CHANGING PRE-SET CUP SIZES
Each beverage button has been set to certain values (pre-sets).
See chapter 5. You can change all pre-set values and enter ones.
25.1 1-AND 2-CUP BUTTONS; SPECIAL CUP BUTTON
This procedure is the same for all five coffee buttons (Fig. 3).
COFFEE READY
EXAMPLE: Changing the 1-cup Coffee Button. (Fig.3).
• Place a cup underneath the coffee spouts.
• Push and hold the 1-cup Coffee Button until the display
shows
ENOUGH? PRESS BUTTON
.
• When the coffee volume in your cup is at the new desired
level, push the 1-cup Coffee Button again. The display shows
CONFIRMED
✔
COFFEE READY
From now on, this will be the amount of coffee the Z5 will produce
when you push this button.
Please note: the 1-cup and 2-cup buttons are independent of
each other. This means if you pre-set the 1-cup coffee button to
4 oz. the 2-cup button does not automatically produce 8 oz. You
can pre-set the 2-cup button completely independent.
Please note: when changing the volume for the special cup
button, place a cup under the auto cappuccino system.
22.
Содержание 65349R3
Страница 7: ...7 Fig 12 Fig 13 Fig 15 Fig 11 Fig 14 ...