Jura Capresso 64701R1, Инструкция по эксплуатации и гарантия

Страница: 17 / 24

remind you when it is time to perform a decalcifying cycle. The
machine is set to level 2 (medium hard water). If you have
harder water you need to set it to a higher level. If you have
softer water you can set it to level 1. If you are not sure about
the hardness of your water, ask your local water company for
the "Water Hardness in Grains."
HARDNESS LEVEL 1: grains 2-9
HARDNESS LEVEL 2: grains 10-19
HARDNESS LEVEL 3: grains 20-29
HARDNESS LEVEL 4: grains 30+
You can also use the enclosed water hardness indicator strip to
determine the water hardness:
• Insert the stick for one second into the water you want to
use. Shake off any access water and wait for one minute.
• If all five fields of the test stick turn reddish, set the hardness
level to 4. If four fields turn reddish, set the hardness level to 3.
If three or less fields turn reddish, leave the level in position 2.
• If you use Spring Water you can set the hardness level to 1.
You can change the hardness settings as follows:
1.Push and hold the P button (Fig. 3e). FILTER –
2.Turn the Rotary Dial until the display shows HARDNESS .
3.Push the Dial. LEVEL 2
4.Turn the Dial to select from 1 2 3 4 –
5.Push the Dial to confirm your selection. HARDNESS .
6. Push the P button. READY .
Important : If you choose the selection " – " the water hardness
monitor is turned off. In this case the machine will NOT remind
you when it is time to decalcify. Turning off the monitor requires
you to use distilled water only or the Water Filter Cartridge
(chapter 16a).
18. PROGRAMMING
Please note : As long as you are in programming mode, you
cannot brew coffee.
• Press and hold the P button until the display shows
FILTER .
Turning the Dial clockwise the following functions will appear
in the display:
HARDNESS
AROMA
AUTO OFF
STATS
LANGUAGE
ML / OZ
RINSE
4
To change functions the procedure is always the same:
1. Push and hold P button until display shows
FILTER .
2. Turn Dial to the function you want to change or look up.
3. Push Dial.
4. Turn Dial until desired selection is displayed.
5. Push Dial to confirm selection.
6. Push the P button to get back to
READY .
FlLTER : See chapter 16a.
HARDNESS : See chapter 17.
18a. AROMA
1. Push and hold P button until display shows FILTER .
2. Turn Dial to AROMA
3. Push Dial: ROBUST
4. Turn Dial to select from STANDARD or ROBUST
5. Push Dial to confirm selection.
17.