•
Confirm the mobile device connected to the original signal of router.
•
Then login by this domain name: 192.168.0.2
•
If failed, please cut off the power supply and re-connect the power supply. Then
you login by the domain name after the repeater extended automatically.
•
If the last step above doesn't work, please change to a laptop or a mobile phone
to login.
Method 2:
•
First make sure you have connected to the Wi-Fi signal (no matter the router's or
extender's), and then login the interface of the router;
•
Open the Client List of the router interface to view connected devices. After
finding the mac address
(That is attached to the product stick) of the repeater, you can get the IP address of
extender that assigned by router.
•
Open a browser, enter the IP address in the address bar, and then you can enter
the interface.
Method 3:
recommend
•
Download and update the device firmware v1.0.2 on juplink.com
•
After reset try login by this domain name:
router.juplink.com
Q6: l can find someone else's WIFI signal, but I can't find mine?
A6: • You need to check the signal strength that your mobile advice can get in the
same place. (Maybe the signal in this place is poor)
•
You should check if the encryption of the superior router is WEP. Only no
encryption, WPA, WPA2 and mixed mode can be supported by this repeater.
•
Whether the superior signal is hidden; (You can check this by your mobile advice)
Q7: Always prompt for failure when extending.
A7: • Check the indicator is green/not bright (if the indicator not bright it means a
failed matching).
•
If you can't find the superior signal when extending, please try the following
solutions:
①
Set the SSID of the router and repeater to numbers and letters combination;
②
Move the repeater closer to the router ( within 1ft is recommended );
③
Confirm the encryption mode of the superior signal is not WEP. If Only no
encryption,
WPA-PSK, WPA2-PSK or their mixed mode can be supported by our repeater
④
Confirm the superior signal is not turned off or hidden.
⑤
Login the interface of the router to check if restrictions are made, such as MAC
filter, Blacklist.
⑥
Confirm the password of your superior router you entered is correct(The
password entered in the extension process is the password for the superior router)
⑦
Modify the signal name and password for the superior router, and reset the
repeater.
