![Jupiter Avionics JA95-R03 Скачать руководство пользователя страница 16](http://html.mh-extra.com/html/jupiter-avionics/ja95-r03/ja95-r03_installation-and-operating-manual_2033800016.webp)
JA95-R03 Audio Controller - Remote Mount - One Transceiver
Installation and Operating Manual
Rev
B
Page 13
2.5.3.11
Connector Maps
When the Mode of Operation has been selected from the Connector Pin Configuration page (
),
only the appropriate connector maps and interconnects will be shown in this section. (See also
2.5.4
Other Configuration Features
In the JA95-R03 Product Information Window, the model number, serial number and check sum of the JA95-R03
audio panel can be viewed.
2.6
Installation Kit
The kit required to install this unit is not included with the unit.
The installation kit (Part # INST-JA95) consists of the following:
Quantity
Description
JAC Part #
2
TAG ring
CON-5500-0625
1
D-Sub 37-pin connector, hood and 37 crimp pins
CON-3420-0037
1
D-Sub 50-pin connector, hood and 50 crimp pins
CON-3420-0050
2
Heat Shrink Tubing
WIR-HTSK-1000
2.6.1
Recommended Crimp Tools
Standard D-Sub Crimp Tool Chart
Tool Type
Hand crimping tool
Positioner
Insertion/extractor tool
POSITRONIC
9507-0-0-0
9502-5-0-0
4711-2-0-0
DANIELS
AFM 8
K13-1
91067-2
MIL-SPEC
M22520/2-01
M22520/2-08
M81969/1-02
2.7
Installation Drawings
The drawings and documents required for Installation can be found in
2.7.1
Generation of Custom Drawings
The connector maps and interconnects in Appendix A of this manual are generic drawings based on the standard
version of the JA95-R03. However, if a unit has been configured using JAC’s ProCS™ software to make changes, the
software can be used to generate fully customized interconnects and connector maps for use by the installer.