JA95-043 Audio Controller - AMS43 Compatible
Installation and Operating Manual
Rev B
Page 4
Output Load
Phone load
600
Ω
±
10%
Transceiver Microphone load
150
Ω
±
10%
Intercom Tie Line type 1 rated load
2000
Ω
±
10%
Intercom Tie Line type 2 rated load
2000
Ω
±
10%
Intercom Tie Line type 1 maximum load
666
Ω
max (3 loads)
Intercom Tie Line type 2 maximum load
285
Ω
max (7 loads)
Volume Controls
Receive Audio control variation
32
±
3dB
ICS Audio control variation
42
±
3dB
Input to Input Crosstalk Level
Input to Input crosstalk
≤
60 dB
Input to Input crosstalk for DIRECT AUDIO 2
Not Applicable
Audio Noise Level without Signal
Noise level below the rated output
≥
60 dB
1.4.1.2
Audio Performance, Other
DIRECT AUDIO 2 input is connected to the PILOT PHN HI through a 100 Ohm
Ω
±
20 % resistor.
1.4.1.3
Discrete Signals
Active low control input, active signal level
≤
+3 Vdc
Active low control input, inactive signal level
≥
+10 Vdc
Active low control input, current
≤
10 mAdc
Active low control output, active output
≤
+2 Vdc
Active low control output, active, current
≤
1 Adc
ALERT ENABLE signal active signal level
≥
+9 Vdc
ALERT ENABLE signal, when active, sinks
≤
10 mAdc
ALERT ENABLE signal inactive signal level
≤
+3 Vdc
1.4.1.4
Lights Input
LIGHTS INPUT ranges
LIGHTS INPUT current
1.4.2
Mechanical Specifications
Height
Behind panel depth
Faceplate width
Behind panel width
Weight
Connectors (3):
J1
J2
J3
J4
Mounting
Bonding
Installation kit part number
0 to 28, 0 to 14 and 0 to 5 Vdc
10 mA max.
1.875 in [47.63 mm] max
5.48 in [139 mm] max
5.75 in [146 mm] max
5.00 in [127 mm] max
1.64 lbs. [0.74 kg] max
One 37-pin D-Sub male
One 50-pin D-Sub male
One 4 pole 3.5mm stereo jack
One 4-40 0.25" threaded stud
4 Dzus fasteners
≤
2.5 m
Ω
INST-95
043