24
Fitting the plinth
Alignment height of 820 mm
ª
If using a 140 to 170 mm plinth, make a cut-out as
shown (Fig. 17).
ª
If using a plinth higher than 100 mm but less than
140 mm, cut the height compensation strip sup-
plied with the appliance to the required depth and
fit it between the plinth and the ventilation grille,
pressing it into position below this grille (Fig. 18).
ª
If using a 100 mm plinth, fit the complete height
compensation strip (Fig. 19).
Fig. 17
Alignment height of 870 mm
ª
If using a 190 to 220 mm plinth, make a cut-out as
shown (Fig. 17).
ª
If using a plinth higher than 150 mm but less than
190 mm, cut the height compensation strip sup-
plied with the appliance to the required depth and
fit it between the plinth and the ventilation grille
(Fig. 18).
ª
If using a 150 mm plinth, fit the complete height
compensation strip (Fig. 19).
ª
If the appliance is installed at the end of a row of
units, insert foot
E
to hold the plinth in place (Fig. 20).
870
820
140
190
30
100
900
170
220
Fig. 18
Fig. 19
Fig. 20
140
190
100
150
30
100
E
