20
POSITIONING
Height adjustment
The height of the appliance is adjustable from 820 to
870 mm (Fig. 1) to line up with existing kitchen units.
Fig. 1
Before installing the appliance between units, adjust
the height of the feet and rear wheels.
The wheels are factory set for a height of 820 mm. To
align the appliance to a height of 870 mm, raise it by
adjusting the feet with a spanner, then remove the
wheels and refit them in the lowest position (Fig. 2).
Fig. 2
820
870
820
870
Fitting the side panels
ª
Fit the brackets onto the panels in the positions
shown in the diagram (Fig. 3).
The dimension of 132 mm is allowed for fitting a
100 mm plinth below the panel. For different plinth
sizes, reduce or increase the dimension of 132 mm
accordingly.
Fig. 3
ª
Rest the panels against the appliance (Fig. 4).
ª
Fit the rear brackets, taking into account the thick-
ness of the panels (maximum width of unit 900 mm).
ª
Secure the panels at the front.
If using panels less than 20 mm thick, fit spacer
plates A, supplied with the appliance, on the hinge
side (Fig. 4).
Fig. 4
15
820
15
280
541 20
5765
132
1052
275
RIGHT HAND
SIDE PANEL
FRONT
EDGE
INSIDE
FACE
REAR
EDGE
A
