JUNO JGVX60626, Руководство пользователя

Страница: 8 / 48

Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
P1 10.5 0.932 225
P2 7 - 14 0.6 - 1.6 40 - 160
P3 12.5 - 14.5 1.4 - 1.8 169 - 179
P4 12 - 14 0.7 - 0.9 75 - 85
P5 10 0.9 30
P6 9 - 10 1.1 - 1.3 219 - 229
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that
is on the rating plate.
SETTINGS
Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener according
to the water hardness.
• The activation or the deactivation of the
acoustic signal for end of programme.
• The selection of the colour for
TimeBeam.
• The activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
These settings will be saved until you
change them again.
How to set the programme
selection mode
The appliance is in programme selection
mode when the display shows the
programme number P1 .
When you activate the appliance, usually it
is in programme selection mode. However,
if this does not happen, you can set the
programme selection mode in the following
way:
Press and hold
Reset until the appliance is
in programme selection mode.
8