11
Dismounting the carbon filter
To dismount the filter, press the two buttons
B and pull it downwards.
Replacing the lamp -
Fig. 4
a) Disconnect the hood from the electricity.
b) Remove the blown halogen light bulb
using a screwdriver.
c) Only ever use halogen light bulbs with a
maximum of 20 W.
d) Fit the new light bulb taking care to
ensure its contacts are correctly fitted in
the connector.
If the lighting fails to work, make sure that
the halogen light bulbs have been fitted
correctly before contacting the technical
assistance service!
Cleaning
To clean the outside of the hood use a cloth
moistened with denatured alcohol or neutral
liquid detergents.
Never use products containing abrasive.
Attention
Failure to observe the rules for cleaning the
appliance and changing and cleaning the
filters may cause fires.
Therefore, we recommend observing these
instructions.
Fastening of shelves
(Fig. 5)
Fasten the four side supports I to the adjacent
cabinets and place the shelf on the supports.
