Junker JD66WW50, Инструкция по установке и эксплуатации

Страница: 17 / 44

17
Replacing bulbs
:
Risk of electric shock!
When changing the bulbs, the bulb socket contacts are live.
Before changing the bulb, unplug the appliance from the mains
or switch off the circuit breaker in the fuse box.
Important!
Only use bulbs of the same type and wattage.
Replacing halogen bulbs
Note:
When inserting halogen bulbs, do not touch the glass
tube. Use a clean cloth to insert the halogen bulbs.
1.
Carefully remove the bulb ring using a suitable tool.
2.
Pull out the bulb and replace it with a bulb of the same type.
3.
Insert the bulb cover.
4.
Insert the mains plug or switch on the fuse again.
Replacing filament bulbs
1.
Lift bulb cover slightly and push towards the outside of the
appliance.
2.
Unscrew the bulb and replace it with a bulb of the same type.
3.
Insert bulb cover.
4.
Insert the mains plug and switch on the fuse again.
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate with these numbers can be
found inside the appliance (remove the metal mesh grease
filter to gain access).
You can make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
Please be aware that a visit by an after-sales engineer will be
charged if a problem turns out to be the result of operator error,
even during the warranty period.
After-sales contact details for all countries can be found in the
attached after-sales service directory.
Accessories for circulating-air mode
(not included in the delivery)
Basic equipment
Throw-away filter
E no. FD no.
After-sales service O
1
2
1 JZ5138X5
2 743169