Junker JD36AE50, Инструкция по установке и эксплуатации

Страница: 26 / 56

26
2.
Connect the power cord provided to the appliance. ¨
3.
Use the strain relief to secure the power cord in place. ©
4.
Screw the four angle brackets to the appliance. Ensure that
the screws are positioned correctly.
ª
Screw in the screws
until 8 mm of the threaded section is still protruding.
«
Installation
Installation
1.
Use the angle brackets to hang the appliance on the screws
and align it.
2.
Measure the distance from the appliance to the wall and
mark this on the filler strip.
3.
If required, shorten the filler strip to the required dimension.
4.
Remove the appliance and screw in the filler strip.
5.
Remount the appliance, align it and screw it in place.
Carefully screw in all screws.
6.
Establish the electrical connection.
$
%