Juniper WLA Series, Техническая документация

Страница: 63 / 92

13.
If the access point is not properly secured (the access point sits flat against the ceiling
bracket and does not move when properly installed), press on the release button on
the top of the bracket to unlock the access point. Realign the access point, making
sure the cable is still connected, and push in until the access point clicks securely into
place.
NOTE: We recommend that you use the optional security kit to secure the
access point (Step 14). The kit includes a security tool and a security screw.
Be sure to retain the tool so you can unlock and move the access point.
Never use a power tool to insert or remove the security screw.
14.
To lock the access point into place using the security kit, secure the security screw in
the release button by using the tool provided with the security kit (see
Figure 9 on
page 51 ). Do not overtighten the screw.
Figure 9: Locking the Access Point onto the Ceiling Tile
Related
Documentation
Installing the WLA532E Access Point Using the Plenum Bracket Kit on page 51
•
•
Installing the WLA532E Access Point on the Wall Using the WLA-BRKT-WALL
Wall-Mount Kit on page 64
•
Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-EU
Wall-Mount Kit on page 70
•
Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-NA
Wall-Mount Kit on page 72
•
Installing the WLA532E Access Point on a Ceiling Rail Using the Trapeze Legacy
Mounting Bracket Adapter Kit on page 57
Installing the WLA532E Access Point Using the Plenum Bracket Kit
The Juniper Networks WLA532E Wireless LAN Access Point is plenum rated and can be
installed (with attached antennas) using a plenum bracket in concealed plenum spaces
inside the ceiling in locations that require the access point to not be visible.
51 Copyright © 2012, Juniper Networks, Inc.
Chapter 7: Installing and Connecting the Access Point