Juniper WLA Series Скачать руководство пользователя страница 35

Страница: 35 / 92

CHAPTER 4

Safety Standards and Guidelines

•

General Safety Guidelines and Warnings on page 23

•

Qualified Personnel Warning on page 24

•

General Electromagnetic Safety and Compliance on page 24

•

Medical Safety Compliance for WLA Series Access Points on page 25

•

No User Serviceable Parts Warning on page 26

•

Product Disposal Warning on page 27

General Safety Guidelines and Warnings

This topic applies to hardware devices in the WLA Series Wireless LAN Access Point
product family. For a complete list of safety guidelines and warnings and detailed
compliance information, see the

Regulatory Guide for Wireless Topics

documentation at

Wireless LAN Services (WLS) Product Documentation

To comply with safety and environmental standards specified by various agencies:

•

Perform only the procedures explicitly described in the hardware documentation for
this device.

•

Keep the area around the device clear and free from dust before, during, and after
installation.

•

Keep tools away from areas where people could trip over them.

•

Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the device during installation.

•

Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.

•

Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.

•

Never attempt to lift on your own, any object that is too heavy for one person to handle.

•

Never perform installation tasks or manipulate wiring during electrical storms.

Documentation

Installation Instructions Warning on page 43

•

Medical Safety Compliance for WLA Series Access Points on page 25

Содержание WLA Series










































































Результаты поиска

Содержание WLA Series

Отзывы:

Бренды по названию

Популярные бренды

Juniper WLA Series, Техническая документация

Результаты поиска

Содержание WLA Series

Отзывы:

Бренды по названию

Популярные бренды