Juniper SRX340, Руководство по оборудованию

Страница: 76 / 150

Connecting to the SRX340 Services Gateway CLI Using a Dial-Up Modem
To remotely connect to the CLI through a dial-up modem connected to the console port
on the services gateway:
1.
Connect a modem at your remote location to a management device such as a PC or
laptop computer.
2.
Start your asynchronous terminal emulation application (such as Microsoft Windows
HyperTerminal) on the PC or laptop computer.
3.
Select the COM port to which the modem is connected (for example, COM1).
4.
Configure the port settings :
• Bits per second—9600
• Data bits—8
•
Parity—None
•
Stop bits—1
• Flow control—None
5.
In the HyperTerminal window, enter AT .
For more information on the AT commands, see the following topics:
• Installation and Upgrade Guide for Security Devices
• Monitoring and Troubleshooting Guide for Security Devices
An OK response verifies that the modem can communicate successfully with the COM
port on the PC or laptop.
6.
Dial the modem that is connected to the console port on the services gateway by
entering
ATDT remote-modem-number . For example, if the number of the modem
connected to the console port on the services gateway is 0013033033030, enter
ATDT 0013033033030 .
The services gateway login prompt appears.
7.
Log in as the root user. No password is required at initial connection, but you must
assign a root password before committing any configuration settings.
Related
Documentation
•
Connecting the Dial-Up Modem to the Console Port on the SRX340 Services Gateway
on page 57
Copyright © 2016, Juniper Networks, Inc. 58
SRX340 Services Gateway Hardware Guide