Juniper SRX340, Руководство по оборудованию

Страница: 25 / 150

Table 3: SRX340 Services Gateway Front Panel Components (continued)
Description Component Callout
Eight Gigabit Ethernet LAN ports (0/0 to 0/7)
The Gigabit Ethernet ports have the following characteristics:
• Use an RJ-45 connector
• Operate in full-duplex and half-duplex modes
• Support flow control
• Support autonegotiation
The Gigabit Ethernet ports can be used to:
• Function as front-end network ports
• Provide LAN and WAN connectivity to hubs, switches, local
servers, and workstations
• Forward incoming data packets to the services gateway
• Receive outgoing data packets from the services gateway
1 G Ethernet ports 7
The services gateway has one USB port that accepts a USB storage
device. USB port 9
Indicate component and system status, and troubleshooting
information at a glance. LEDs 10
Use the Power button to shut down the services gateway. Power button 11
Figure 2 on page 7 shows the LEDs on the front panel.
Figure 2: SRX340 Services Gateway Front Panel LEDs
Table 4 on page 7 lists the front panel LEDs.
Table 4: SRX340 Services Gateway Front Panel LEDs
Description Component
• Solid amber (noncritical alarm)
•
Solid red (critical alarm)
• Off (no alarms)
ALARM
• Solid green (operating normally)
• Solid red (error detected)
STAT
7 Copyright © 2016, Juniper Networks, Inc.
Chapter 2: Chassis Description