Juniper QFX5100, Руководство по оборудованию

Страница: 76 / 256

breakout cable or as a single 40-Gigabit Ethernet interface. On all QFX5100 product
SKUs, the ports are enabled by default and the default config adds the ports to the
default VLAN.
Downlink ports are product SKU-specific:
•
QFX5100-96S –has 96 small form-factor pluggable plus (SFP+) ports that support
SFP and SFP+ transceivers, as well as DAC cables.
• QFX5100-48S –has 48 SFP+ ports that support SFP and SFP+ transceivers, as well as
DAC cables.
•
QFX5100-24Q –has 24 QSFP+ access ports that can be configured to operate as
10-Gigabit Ethernet interfaces or as a single 40-Gigabit Ethernet interface.
Figure 27 on page 58 shows the location of SFP+ and QSFP+ ports for the QFX5100-96S,
Figure 28 on page 58 shows these ports for the QFX5100-48S and Figure 29 on page 59
shows the location of QSFP+ ports for the QFX5100-24Q.
Figure 27: Port Panel QFX5100-96S
3— 1— QSFP+ uplink ports (8) Electrostatic discharge (ESD) terminal
2—SFP+ access ports (96)
Figure 28: Port Panel QFX5100-48S
3— 1— QSFP+ uplink ports (6) Electrostatic discharge (ESD) terminal
2—SFP+ access ports (48)
Copyright © 2014, Juniper Networks, Inc. 58
QFX5100 Switch Hardware Guide