Juniper QFX3500, Техническая документация

Страница: 614 / 669

Locating the Serial Number on a QFX5100 Device or Component
IN THIS SECTION
Listing the Chassis and Component Details Using the CLI | 590
Locating the Chassis Serial Number ID Label on a QFX5100 Switch | 591
Locating the Serial Number ID Labels on FRU Components | 593
If you are returning a switch or component to Juniper Networks for repair or replacement, you must locate
the serial number of the switch or component. You must provide the serial number to the Juniper Networks
Technical Assistance Center (JTAC) when you contact them to obtain a Return Materials Authorization
(RMA). See “Contacting Customer Support to Obtain a Return Materials Authorization for a QFX Series
Device or Component” on page 619 .
If the switch is operational and you can access the command-line interface (CLI), you can list serial numbers
for the switch and for some components with a CLI command. If you do not have access to the CLI or if
the serial number for the component does not appear in the command output, you can locate the serial
number ID label on the switch or component.
NOTE: If you want to find the serial number ID label on a component, you need to remove the
component from the switch chassis, for which you must have the required parts and tools
available.
Listing the Chassis and Component Details Using the CLI
To list the QFX5100 switch and components and their serial numbers, use the show chassis hardware CLI
operational mode command. If you are using the QFX5100 switch as a Node device in a QFabric system,
you must first log in to the switch using the request component login CLI operational mode command.
user@device>
show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis EL9270 QFX5100-24Q-2P
Pseudo CB 0
590