Juniper OCX1100, Руководство по оборудованию

Страница: 53 / 204

Table 20 on page 33 provides the required environmental conditions for normal switch
operation.
Table 20: OCX1100 Switch Environmental Tolerances
Environment Tolerance
Switch or
device
Temperature Relative Humidity Altitude
Normal operation ensured in the temperature
range 32° F through 104° F (0° C through
40° C) at altitudes up to 9850 ft (3000 m).
Nonoperating storage temperature range
–40° F (–40° C) through 158° F (70° C)
Normal operation ensured in
relative humidity range of 0%
through 95% (noncondensing) No performance
degradation up to 9850
feet (3000 meters) OCX1100
switches
NOTE: Install OCX1100 switches only in restricted areas, such as dedicated
equipment rooms and equipment closets, in accordance with Articles 110–16,
110–17, and 110–18 of the National Electrical Code, ANSI/NFPA 70.
Related
Documentation
Clearance Requirements for Airflow and Hardware Maintenance for OCX1100 Switches
on page 37
•
General Site Guidelines
Efficient device operation requires proper site planning and maintenance and proper
layout of the equipment, rack or cabinet (if used), and wiring closet.
To plan and create an acceptable operating environment for your device and prevent
environmentally caused equipment failures:
•
Keep the area around the chassis free from dust and conductive material, such as
metal flakes.
• Follow prescribed airflow guidelines to ensure that the cooling system functions properly
and that exhaust from other equipment does not blow into the intake vents of the
device.
•
Follow the prescribed electrostatic discharge (ESD) prevention procedures to prevent
damaging the equipment. Static discharge can cause components to fail completely
or intermittently over time.
•
Install the device in a secure area, so that only authorized personnel can access the
device.
Related
Documentation
Prevention of Electrostatic Discharge Damage on page 167
•
33 Copyright © 2017, Juniper Networks, Inc.
Chapter 5: Preparation Overview