16 | Juniper Networks, Inc.
5. Use the Ethernet port you just configured to connect the IDP appliance
to your network. To connect directly to another computer, use a cross-
over cable. To connect to a hub or switch, use a straight-through cable.
6.
Using the computer that is on your network
, open a Web browser. Enter
the IP address you chose in the configuration script. Because the ACM
uses a secure form of HTTP, you
MUST
enter
https://
before the IP
address.
7. Enter the default user name (
root
) and password (
abc123
).
When the ACM wizard appears, proceed to “Configure the IDP Sensor”
on page 17.
